| Super Portability Without Sacrificing Intensity
-The Spectroline B-Series battery-operated lamps are so light and
compact that you can take them almost anywhere, which makes them suitable
for those times when you need a UV source but done have an AC wall
outlet available. They are the most powerful units of their type,
with intensities up to twice as high as competitors units! A specular
aluminum reflector maximizes UV irradiance for even brighter fluorescent
response.
Ideal for Numerous Applications
-These versatile units are offered in short, medium and long wave
UV models and may be used anywhere on batteries. In addition, the
BEA-140, BEF-140C, BEA-160, BEB-160C and BEF-160C have the capability
of running on 120 volt AC line current through the use of optional
Spectroline AC adapters. They may be relied on for innumerable applications
including UV curing, mineralogy, security control, medical diagnosis,
nondestructive testing, rodent contamination detection and general
fluorescence analysis. The long wave lamps come with integrally
filtered tubes, while the short and medium wave lamps have a separate
LONGLIFE filter assembly which assures higher initial UV irradiance
and resists solarization so that it lasts up to 50 times longer
than conventional UV filters.
Long-Lasting Battery Power
-The B-Series lamps were designed to provide hours of uninterrupted
use. In fact, the B-14N, B-14F, BEA-140 and BEF-140C can be operated
for approximately five hours on fresh batteries, while the BEA-160,
BEB-160C and BEF-160C can operate for as long as seven hours.
Rechargeable Operation
-The B-14N and B-14F operate on five C-cell batteries, either alkaline
or nicad rechargeable. By connecting the model RB-1400 charger to
the lamp receptacle, the batteries may be recharged without removing
them from the lamp. While the BEA-140 and BEF-140C will also operate
with either five alkaline or nicad batteries, the nicad cells must
be removed from the lamp and recharged in a commercially available
charging unit.
AC Adaptability -The
model BAC-14 AC adapter for the BEA-140 and BEF-140C, or the model
BAC-16 AC adapter for the BEA-160, BEB-160C and BEF-160C, may be
used to easily convert the lamps to 120 volt operation. There抯 no
need to remove the batteries. Simply insert the jack of the adapter
into the lamp receptacle and then plug it into a 120 volt wall outlet.
Designed for Hand-Held
Comfort and Durability -All B-Series lamps are specially constructed
to feel comfortable in your hand, even after hours of operation.
These rugged units are built for hard, round-the-clock use. The
6-watt lamps come with a built-in, metal carrying handle, while
the B-14N and B-14F have a convenient wrist carrying strap. All
4-watt lamps also have a snap-on, metal carrying handle (model CH-180)
available as an accessory. The long wave lamps (models B-14N, BEA-140
and BEA-160) feature a transparent, plastic tube guard to insure
against accidental breakage. All units are built with heavy-gauge,
anodized-aluminum housings.
|
